770-71-8Relevant articles and documents
Redox-active ligand based Mn(i)-catalyst for hydrosilylative ester reduction
Chakraborty, Soumi,Das, Arpan,Mandal, Swadhin K.
supporting information, p. 12671 - 12674 (2021/12/04)
Herein a Mn(i) catalyst bearing a redox-active phenalenyl (PLY) based ligand is reported for the efficient hydrosilylation of esters to alcohols using the inexpensive silane source polymethylhydrosiloxane (PMHS) under mild conditions. Mechanistic investigations suggest a strong ligand-metal cooperation where a ligand-based single electron transfer (SET) process initiates the reaction through Si-H bond activation.
Development of effective bidentate diphosphine ligands of ruthenium catalysts toward practical hydrogenation of carboxylic acids
Saito, Susumu,Wen, Ke,Yoshioka, Shota
, p. 1510 - 1524 (2021/06/18)
Hydrogenation of carboxylic acids (CAs) to alcohols represents one of the most ideal reduction methods for utilizing abundant CAs as alternative carbon and energy sources. However, systematic studies on the effects of metal-to-ligand relationships on the catalytic activity of metal complex catalysts are scarce. We previously demonstrated a rational methodology for CA hydrogenation, in which CA-derived cationic metal carboxylate [(PP)M(OCOR)]+ (M = Ru and Re; P = one P coordination) served as the catalyst prototype for CA self-induced CA hydrogenation. Herein, we report systematic trial- and-error studies on how we could achieve higher catalytic activity by modifying the structure of bidentate diphosphine (PP) ligands of molecular Ru catalysts. Carbon chains connecting two P atoms as well as Ar groups substituted on the P atoms of PP ligands were intensively varied, and the induction of active Ru catalysts from precatalyst Ru(acac)3 was surveyed extensively. As a result, the activity and durability of the (PP)Ru catalyst substantially increased compared to those of other molecular Ru catalyst systems, including our original Ru catalysts. The results validate our approach for improving the catalyst performance, which would benefit further advancement of CA self-induced CA hydrogenation.
A Bifunctional Copper Catalyst Enables Ester Reduction with H2: Expanding the Reactivity Space of Nucleophilic Copper Hydrides
Kaicharla, Trinadh,Ngoc, Trung Tran,Teichert, Johannes F.,Tzaras, Dimitrios-Ioannis,Zimmermann, Birte M.
supporting information, p. 16865 - 16873 (2021/10/20)
Employing a bifunctional catalyst based on a copper(I)/NHC complex and a guanidine organocatalyst, catalytic ester reductions to alcohols with H2 as terminal reducing agent are facilitated. The approach taken here enables the simultaneous activation of esters through hydrogen bonding and formation of nucleophilic copper(I) hydrides from H2, resulting in a catalytic hydride transfer to esters. The reduction step is further facilitated by a proton shuttle mediated by the guanidinium subunit. This bifunctional approach to ester reductions for the first time shifts the reactivity of generally considered "soft"copper(I) hydrides to previously unreactive "hard"ester electrophiles and paves the way for a replacement of stoichiometric reducing agents by a catalyst and H2.
Radical hydroxymethylation of alkyl iodides using formaldehyde as a C1 synthon
Caiger, Lewis,Constantin, Timothée,Douglas, James J.,Juliá, Fabio,Leonori, Daniele,Sheikh, Nadeem S.,Sinton, Conar
, p. 10448 - 10454 (2021/08/20)
Radical hydroxymethylation using formaldehyde as a C1 synthon is challenging due to the reversible and endothermic nature of the addition process. Here we report a strategy that couples alkyl iodide building blocks with formaldehyde through the use of photocatalysis and a phosphine additive. Halogen-atom transfer (XAT) from α-aminoalkyl radicals is leveraged to convert the iodide into the corresponding open-shell species, while its following addition to formaldehyde is rendered irreversible by trapping the transient O-radical with PPh3. This event delivers a phosphoranyl radical that re-generates the alkyl radical and provides the hydroxymethylated product.
Continuous-Flow Amide and Ester Reductions Using Neat Borane Dimethylsulfide Complex
?tv?s, Sándor B.,Kappe, C. Oliver
, p. 1800 - 1807 (2020/02/27)
Reductions of amides and esters are of critical importance in synthetic chemistry, and there are numerous protocols for executing these transformations employing traditional batch conditions. Notably, strategies based on flow chemistry, especially for amide reductions, are much less explored. Herein, a simple process was developed in which neat borane dimethylsulfide complex (BH3?DMS) was used to reduce various esters and amides under continuous-flow conditions. Taking advantage of the solvent-free nature of the commercially available borane reagent, high substrate concentrations were realized, allowing outstanding productivity and a significant reduction in E-factors. In addition, with carefully optimized short residence times, the corresponding alcohols and amines were obtained in high selectivity and high yields. The synthetic utility of the inexpensive and easily implemented flow protocol was further corroborated by multigram-scale syntheses of pharmaceutically relevant products. Owing to its beneficial features, including low solvent and reducing agent consumption, high selectivity, simplicity, and inherent scalability, the present process demonstrates fewer environmental concerns than most typical batch reductions using metal hydrides as reducing agents.
Nitrile Synthesis by Aerobic Oxidation of Primary Amines and in situ Generated Imines from Aldehydes and Ammonium Salt with Grubbs Catalyst
Utsumi, Tatsuki,Noda, Kenta,Kawauchi, Daichi,Ueda, Hirofumi,Tokuyama, Hidetoshi
supporting information, p. 3583 - 3588 (2020/08/05)
Herein, a Grubbs-catalyzed route for the synthesis of nitriles via the aerobic oxidation of primary amines is reported. This reaction accommodates a variety of substrates, including simple primary amines, sterically hindered β,β-disubstituted amines, allylamine, benzylamines, and α-amino esters. Reaction compatibility with various functionalities is also noted, particularly with alkenes, alkynes, halogens, esters, silyl ethers, and free hydroxyl groups. The nitriles were also synthesized via the oxidation of imines generated from aldehydes and NH4OAc in situ. (Figure presented.).
Design, Synthesis, and in vitro Evaluation of P2X7 Antagonists
Durner, Anna,Koufaki, Maria,Kritsi, Eftichia,Nicke, Annette,Papakostas, Alexios,T. Pournara, Dimitra,Zoumpoulakis, Panagiotis
, p. 2530 - 2543 (2020/10/19)
The P2X7 receptor is a promising target for the treatment of various diseases due to its significant role in inflammation and immune cell signaling. This work describes the design, synthesis, and in vitro evaluation of a series of novel derivatives bearing diverse scaffolds as potent P2X7 antagonists. Our approach was based on structural modifications of reported (adamantan-1-yl)methylbenzamides able to inhibit the receptor activation. The adamantane moieties and the amide bond were replaced, and the replacements were evaluated by a ligand-based pharmacophore model. The antagonistic potency of the synthesized analogues was assessed by two-electrode voltage clamp experiments, using Xenopus laevis oocytes that express the human P2X7 receptor. SAR studies suggested that the replacement of the adamantane ring by an aryl-cyclohexyl moiety afforded the most potent antagonists against the activation of the P2X7 cation channel, with analogue 2-chloro-N-[1-(3-(nitrooxymethyl)phenyl)cyclohexyl)methyl]benzamide (56) exhibiting the best potency with an IC50 value of 0.39 μΜ.
A General Method for Photocatalytic Decarboxylative Hydroxylation of Carboxylic Acids
Khan, Shah Nawaz,Zaman, Muhammad Kashif,Li, Ruining,Sun, Zhankui
, p. 5019 - 5026 (2020/05/01)
A general and practical method for decarboxylative hydroxylation of carboxylic acids was developed through visible light-induced photocatalysis using molecular oxygen as the green oxidant. The addition of NaBH4 to in situ reduce the unstable peroxyl radical intermediate much broadened the substrate scope. Different sp3 carbon-bearing carboxylic acids were successfully employed as substrates, including phenylacetic acid-type substrates, as well as aliphatic carboxylic acids. This transformation worked smoothly on primary, secondary, and tertiary carboxylic acids.
General and Phosphine-Free Cobalt-Catalyzed Hydrogenation of Esters to Alcohols
Shao, Zhihui,Zhong, Rui,Ferraccioli, Raffaella,Li, Yibiao,Liu, Qiang
supporting information, p. 1125 - 1130 (2019/10/22)
Catalytic hydrogenation of esters is essential for the sustainable production of alcohols in organic synthesis and chemical industry. Herein, we describe the first non-noble metal catalytic system that enables an efficient hydrogenation of non-activated esters to alcohols in the absence of phosphine ligands (with a maximum turnover number of 2391). The general applicability of this protocol was demonstrated by the high-yielding hydrogenation of 39 ester substrates including aromatic/aliphatic esters, lactones, polyesters and various pharmaceutical molecules.
Catalytic Enantioselective α-Ketol Rearrangement
Wu, Hua,Andres, Rémi,Wang, Qian,Zhu, Jieping
supporting information, p. 499 - 503 (2018/12/13)
A highly enantioselective α-ketol rearrangement has been developed. In the presence of a chiral Cu-bisoxazoline complex, achiral β-hydroxy-α-dicarbonyls were isomerized to chiral α-hydroxy-β-dicarbonyls and their bicyclic derivatives in excellent yields and enantioselectivities. Enantioenriched 2-acyl-2-hydroxy cyclohexan-1-ones, dihydroxyhexahydrobenzofuranones, and dihydroxyhexahydro-cycloheptafuranones, with up to three stereocenters, were readily prepared from achiral starting materials in one operation. The reaction is applicable to the desymmetrization of meso substrates and kinetic resolution of racemic alcohols.
