593-45-3Relevant articles and documents
Importance of size and distribution of Ni nanoparticles for the hydrodeoxygenation of microalgae oil
Song, Wenji,Zhao, Chen,Lercher, Johannes A.
, p. 9833 - 9842 (2013)
Improved synthetic approaches for preparing small-sized Ni nanoparticles (d=3 nm) supported on HBEA zeolite have been explored and compared with the traditional impregnation method. The formation of surface nickel silicate/aluminate involved in the two pr
Tris(trimethylsilyl)silane. A New Reducing Agent
Chatgilialoglu, C.,Griller, D.,Lesage, M.
, p. 3641 - 3642 (1988)
Tris(trimethylsilyl)silane is an effective reducing agent for organic halides that functions by a free radical mechanism.It rivals tributyltin hydride in its efficiency and is a superior reagent from ecological and practical perspectives.
One-pot synthesized hierarchical zeolite supported metal nanoparticles for highly efficient biomass conversion
Wang, Darui,Ma, Bing,Wang, Bo,Zhao, Chen,Wu, Peng
, p. 15102 - 15105 (2015)
Hierarchically porous zeolite supported metal nanoparticles are successfully prepared through a base-assisted chemoselective interaction between the silicon species on the zeolite crystal surface and metal salts, in which in situ construction of mesopores and high dispersion of metal species are realized simultaneously.
Catalytic decarboxylation of non-edible oils over three-dimensional, mesoporous silica-supported Pd
Raut, Ravindra,Banakar, Vikram V.,Darbha, Srinivas
, p. 126 - 134 (2016)
Deoxygenation of fatty acids (oleic and stearic acids) and non-edible oil (jatropha oil) over Pd(1-5 wt%) supported on two structurally different, three-dimensional, mesoporous silica (SBA-12 and SBA-16) catalysts was investigated. Pd/SBA-16 (cubic mesoporous structure with space group Im3ˉm) showed higher catalytic activity than Pd/SBA-12 (hexagonal mesoporous structure with space group p63/mmc). The influence of reaction parameters like temperature, H2 pressure and Pd content as well as the nature of the feedstock on catalytic activity and product selectivity was studied. A temperature of above 320 °C, reaction time of 5 h and Pd content (on silica surface) of 3 wt% enabled complete conversion of the fatty compounds into diesel-range hydrocarbons. Deoxygenation proceeded through hydrodeoxygenation and decarboxylation mechanisms when a saturated (stearic) acid was used as a feed while it advanced mainly through decarboxylation route when an unsaturated (oleic) acid was employed. Higher surface hydrophobicity and smaller size particles of Pd are the possible causes for the superior catalytic activity of Pd/SBA-16.
Nanocomposite Hydrogel of Pd@ZIF-8 and Laponite: Size-Selective Hydrogenation Catalyst under Mild Conditions
Sutar, Papri,Bakuru, Vasudeva Rao,Yadav, Pooja,Laha, Subhajit,Kalidindi, Suresh Babu,Maji, Tapas Kumar
supporting information, p. 3268 - 3272 (2021/01/21)
The composite hydrogel of a nanoscale metal–organic framework (NMOF) and nanoclay has emerged as a new soft-material with advanced properties and applications. Herein, we report a facile synthesis of a hydrogel nanocomposite by charge-assisted self-assembly of Pd@ZIF-8 nanoparticles with Laponite nanoclay which coat the surface of Pd@ZIF-8 nanoparticles. Such surface coating significantly enhanced the thermal stability of the ZIF-8 compared to the pristine framework. Further, the Pd@ZIF-8+LP hydrogel nanocomposite shows better size-selective catalytic hydrogenation of olefins than Pd@ZIF-8 nanoparticles based on selective diffusion of the substrate.
Acidic metal-organic framework empowered precise hydrodeoxygenation of bio-based furan compounds and cyclic ethers for sustainable fuels
Gao, Xiang-Yu,He, Hai-Long,Li, Zhi,Liu, Dong-Huang,Wang, Jun-Jie,Xiao, Yao,Yi, Xianfeng,Zeng, Tengwu,Zhang, Yue-Biao,Zheng, Anmin,Zhou, Si-Yu
, p. 9974 - 9981 (2021/12/27)
Target synthesis of hydrocarbons from abundant biomass is highly desired for sustainable aviation fuels (SAFs) to meet the need for both net zero carbon emission and air pollution control. However, precise hydrodeoxygenation (PHDO) of bio-based furan compounds and cyclic ethers to isomerically pure alkanes remains a challenge in heterogenous catalysis, which usually requires delicate control of the distribution of acid and metal catalytic sites in nanoconfined space. Here we show that a nanoporous acidic metal-organic framework (MOF), namely MIL-101-SO3H, enables one-pot PHDO reactions from furan-derivative oxygenates to solely single-component alkanes by just mechanical mixing with commercial Pd/C towards highly efficient and highly selective hydrocarbon production. The superior performance of such tandem catalysts can be attributed to the preferential adsorption of oxygenate precursors and expulsion of deoxygenated intermediates benefiting from Lewis acid sites embedded in the MOF. The strong Br?nsted acidity of MIL-101-SO3H is contributed by both the -SO3H groups and the adsorbed H2O, which makes it a water-tolerant solid acid for durable PHDO processes. The simplicity of mechanical mixing of different heterogenous catalysts allows the modulation of the tandem catalysis system for optimization of the ultimate catalytic performance. This journal is
Light-Driven Enzymatic Decarboxylation of Dicarboxylic Acids
Chen, Bi-Shuang,Liu, Lan,Zeng, Yong-Yi,Zhang, Wuyuan
, p. 553 - 559 (2021/06/25)
Photodecarboxylase from Chlorella variabillis (CvFAP) is one of the three known light-activated enzymes that catalyzes the decarboxylation of fatty acids into the corresponding C1-shortened alkanes. Although the substrate scope of CvFAP has been altered by protein engineering and decoy molecules, it is still limited to mono-fatty acids. Our studies demonstrate for the first time that long chain dicarboxylic acids can be converted by CvFAP. Notably, the conversion of dicarboxylic acids to alkanes still represents a chemically very challenging reaction. Herein, the light-driven enzymatic decarboxylation of dicarboxylic acids to the corresponding (C2-shortened) alkanes using CvFAP is described. A series of dicarboxylic acids is decarboxylated into alkanes in good yields by means of this approach, even for the preparative scales. Reaction pathway studies show that mono-fatty acids are formed as the intermediate products before the final release of C2-shortened alkanes. In addition, the thermostability, storage stability, and recyclability of CvFAP for decarboxylation of dicarboxylic acids are well evaluated. These results represent an advancement over the current state-of-the-art.
Method for decarboxylation and in-situ methylation of alkyl active carboxylic ester
-
Paragraph 0047-0054; 0166-0172; 0203, (2020/06/20)
The invention relates to a method for decarboxylation and in-situ methylation of alkyl active carboxylic ester. The method comprises the following step: in the presence of a cobalt catalyst, a phosphine ligand and an organic solvent, reacting alkyl active carboxylic ester with a trimethyl aluminum reagent to obtain a target methylated product. According to the provided method, trimethyl aluminum is used as a methylation reagent, so that a series of important secondary carbon and tertiary carbon centers are commercially and conveniently constructed successfully; the used carboxylate substrate is rich in source and simple to synthesize; compared with a traditional synthesis method reported before, the method avoids the use of a noble metal catalyst, and meets the requirements of green environment-friendly chemistry; the functional group compatibility is wide, the method is successfully applied to gram-scale reaction, the conversion rate is high, and the method has an important syntheticchemical value.
An unconventional DCOx favored Co/N-C catalyst for efficient conversion of fatty acids and esters to liquid alkanes
Li, Jiang,Liu, Jiaxing,Zhang, Junjie,Wan, Tong,Huang, Lei,Wang, Xintian,Pan, Runze,An, Zhidong,Vlachos, Dionisios G.
, (2019/12/26)
Cobalt (Co) catalysis has recently attracted significant attention in the field of biomass conversion. However, the fabrication of highly dispersive Co nanoparticles at high metal loading with selective facet exposure to achieve specific selectivity is still questionable. In this work, a nitrogen-doped carbon-supported Co catalyst is fabricated for efficient conversion of fatty acids and esters to liquid alkanes. Nitrogen-doping facilitates a highly uniform dispersion of Co nanoparticles even at a high Co loading of 10 wt% and after recycling for 5 runs. The Co/N-C catalyst affords an unconventional decarbonylation/decarboxylation (DCOx) dominant selectivity probably due to partial reduction of cobalt oxides to α-Co0 with only exposure of the (111) facet. Co-existence of Co and N-C leads to strong Lewis acidity and basicity, facilitating the interaction between catalyst and –COOH group, and some important acid-catalyzed step-reactions. The versatility of the Co/N-C catalyst is demonstrated through conversion of various fatty acids and esters.
Cobalt-Catalyzed Decarboxylative Methylation and Ethylation of Aliphatic N-(Acyloxy)phthalimides with Organoaluminum Reagents
Wang, Ze-Zhong,Wang, Guang-Zu,Zhao, Bin,Shang, Rui,Fu, Yao
supporting information, p. 1221 - 1225 (2020/08/17)
A cobalt-catalyzed decarboxylative methylation of aliphatic redox-active esters [ N-(acyloxy)phthalimides; RAEs] with trimethylaluminum under mild conditions was developed, providing a method for transforming a carboxylate group into a methyl group without redox fluctuation. Primary and secondary RAEs were both amenable substrates, whereas a tertiary RAE delivered an elimination product. Triethylaluminum was also used to deliver a decarboxylative ethylation product.
